Monday, 16 January 2017

WHY AC SYSTEM ARE PREFERRED OVER DC


We (Usually all over the world), In all the countries, We use AC voltage for consuming and for use electricity. Why not DC voltages?
It may ask you in an interview so it's better to know it first.
There are some factors for using AC rather than DC.


  • From powerhouse/power plant, we produce AC voltages so it's better to use AC rather than convert it from AC to DC (because there is extra no benefit to using DC). We need to change transformers, breakers and other devices that we are using at the powerhouse.
  • It is easy to maintain AC voltages and step up & step down AC voltages as compared to DC.
  • The cost of power-plant is much lower than the DC generation plant (transformers, circuit breakers etc).

AC DC POWERPLANT

Related Posts:

  • WHY AC SYSTEM ARE PREFERRED OVER DC We (Usually all over the world), In all the countries, We use AC voltage for consuming and for use electricity. Why not DC voltages? It may ask you in an interview so it's better to know it first. There are some factors… Read More
  • ELECTRICAL SWITCHBOARDS STANDARD TESTING PROCEDUREElectrical Switchgear or Switchboard standard testing procedures step by step guide. These standard testing procedures are applying at Siemens Pakistan Co. as our knowledge (not confirm) also these are according to Internatio… Read More
  • WHAT IS THE FREQUENCY OF DC VOLTAGE.What is the frequency of DC voltage?    > Due to the graphically straight line, DC voltage has 'NO' frequency but if this voltage is pure DC.       Unpure frequency has 1.2Hz frequency. What … Read More
  • WHY THE SUPPLY FREQUENCY ON PAKISTAN IS 50HZThe Frequency of the generated Voltage basically depends on these points: No. of poles of the Alternator. The speed of generator's rotor (Field Winding). So, by increasing these above both factors, we can increase the gener… Read More

1 comment: